Wireless Data Loggers
 

Touch Screen Data Loggers
DL 35

 
 
Wireless Data Loggers
Wireless Data Loggers
Wireless Data Loggers
 

• Data Loggers
• Chart Recorders
• Weather Stations
• Universal Calibrators
• Signal Isolator, Convertor, Transmitter and Transducer
• Sensors And Transmitters

 
 
 
Features
  • 8 or 16 universal input ( RTD. Thermocouple, 0-5Vdc, 0 - 20mA or 4-20 mA input signals. )
  • Onboard 32000 reading per channel storage .
  • Parallel Port
  • Individual HI / LO alarm with 2 relay output
  • Additional relay outputs with optional Relay card
  • Networkable using Ethernet Port ( optional )
  • Free PC Based Data Acquisition software
  • 21 CFR Part 11 ( optional )
  • Front end IP65 protection
  • 3.5 inch TFT with Touch Screen Control
  • Onboard USB Port ( Memory stick )
 
Touch Screen Data Loggers DL 35

Benefits
  • Easy to configure analog input type with front end TFT touchscreen.
  • Logged data is secured as storage media is inside the unit.
  • Helps to connect any type of dot matrix printer.
  • Relay output for control or activating external alarms.
  • Individual Alarm relay ( HI / LO ) can be provided for all 16 channels.
  • Data accessible via LAN.
  • Not necessary to pay extra cost.
  • Logged data is secured and can not be manipulated by user.
  • Panel mounting enclosure which can sustain in harsh environment.
  • Easy to use icon menu for setting user parameters with touch interface.
  • Logged data can be downloaded to Memory stick and transfer to PC.
 
 
Technical Specification

Display Specifications
General :
  • Input Resolution : 0.1% of full scale
  • Input Channels : 8 or 16 channel direct universal input
  • Measurement Rate : 4 channels per second on all direct input channels
  • Internal Temperature Reference : 0 to 600C
Analog Inputs :
  • DC Voltage : 0 - 5 Vdcm with accuracy 0.1%.
  • DC Current : 4-20mA, 0-20mA.
  • Accuracy : +/- 0.1% with built in shunt.
  • Thermocouple Resolution : 10C.
  • Reference junction compensation : Yes.
  • RTD Base Accuracy : 0.2% or 0.5C ( 1 F ).
  • Resolution : 0.1C 2 or 3 wire connection. Cable compensation to +50 ohm. Open and short circuit detection.
Recording :
  • Recording Rates : User programmable from 1 sample per second to 1 sample every 10 hours.
  • Data Format : .Txt file ; can be easily openable by variety of softwares.
  • Data Storage Capacity : 512 kb internal memory and this data can be Easily moved to memory stick connected to USB Port.
  • Data Scaling and statistics : By PC Software.
Type : Color Active Matrix TFT Liquid Crystal Display
Size : 3.5 inch diagonal, Resolution: 320 (W) x 240 (H) pixels
Interface : Resistive analog touch screen control
Display Modes : Graphic trending (horizontal), Bar Graphs( Vertical ) Digital Readout (Single or multi-channel), Alarms and event log settable.
Display Windows : Time/Date, Graphics ( bars, large digital, graph ) Disk Status, System Status, Menu Button Bar, Alarms / events.
Communications
Network : 10 / 100 Base T Ethernet standard ( Optional ). Modbus over Ethernet server
Serial : Isolated RS485/RS232 for PC Interface.
Parallel Port : Isolated Dot Matrix Printer port Interface.
USB Port : Isolated USB 2.0 host for connecting Memory stick, USB hard disk.
Power
Requirements : 100 to 240 Vac, 50/60Hz. 20 VA max.
Power Fail Protection : Programmed parameters stored in non - volatile memory. Clock battery backed. Clock battery to be replaced once in 5 Years, one 3V Lithium cell easily replaceable.
Transmitter Power supply Output: Optional isolated 24Vdc @ 120mA output
Input / Output
Relay Output : 2 relay outputs, ( normally open, Close & pole contacts ) rated at 30 Vdc @ 0.5A or 230Vac @ 5Amp Max.
Additional relay outputs
( optional ) :
12 Relay card; separate DIN rail Mounting Card interfaced with RS - 232 interface with this unit.
Safety and Environmental
Operating Range : 0 °C to 50 °C, 10% to 80% RH non - condensing
Dimension : Bezel dimension -110(W) x 101(H) x 16mm above panel.
Unit dimension - 110 x 101 x 150 mm depth.
Panel Cutout - 92 x 92 mm
Protection : IP65 for front bezel when mounted in panel.
Safety : Meets the requirements of EN61010-1 when installed in accordance with the instructions in the manual.
EMC : Meets the requirements of En61326 and CE directive 89/336/EEC.
Weight : Approximately 1.5 kg.